Logo Guidelines and Usage
Logo Guidelines and Authorization:
- Authorization by the Delco Remy Heavy Duty marketing department is required prior to use of the logo.
- Print or other graphics should be offset from the Delco Remy logo by a distance at least the height of the logo's red bar.
- When print is used near the logo, the type is preferred to be smaller than the size of "Delco Remy".
- The Delco Remy logo should not have any other graphic elements such as print, photos, illustrations etc., any closer than a distance equal to the height of the red bar.
- Ink colors for the logo are black and PMS 186 red or process red C=0, M=91, Y=76, K=6.
- The "Delco Remy" in the logo is always white unless printed on a monochrome printer or non-white substrates
- The Delco Remy logo must always be isolated with a white border the same width as the space between the black block and red bar.
- The Delco Remy logo should not have a box or lines around it.
- The Delco Remy logo must not be distorted in shape. The universal logo is square.
- When using this logo for authorized applications, the following statement must accompany, when practicable: "DELCO REMY is a registered trademark of General Motors LLC, licensed to PHINIA Technologies Inc."
- Good judgment is urged in order to optimize the impact of the Delco Remy logo.
- If there are any questions about the logo usage, contact the Delco Remy marketing department at 800-372-0222.